Detailed installation dimensions of toilet anti-collision handrails

When we are in hospitals or elderly apartments, we often see that there are many safety anti-collision handrails installed on the wall. These safety anti-collision handrails can not only play a certain decorative role, but also bring people The use value, especially the safety anti-collision handrail, can make it easier for the elderly to walk when installed, and there will be no slipping and other phenomena, which will bring important effects to people's lives and health. Then the installation of the toilet anti-collision handrail is also very important. The following editor will introduce the detailed installation dimensions of the toilet anti-collision handrail.

The door width of the barrier toilet is not less than 800mm, which is convenient for wheelchair access. The door is moved by sliding, and a horizontal handle is installed on the door, which is convenient for wheelchair users to open or close. When budget permits, when using an electric door, the user presses a button (or red sensor) to open or lock it. The internal space of the barrier toilet should be greater than 1.5m*1.5m, which is conducive to wheelchair maneuvering. The toilet is equipped with special barrier-free sanitary ware. The men's urinal adopts a low-position urinal with a height of less than 450mm. The toilet adopts a toilet without a water tank (actually a hidden water tank) with a height of 450mm; the basin uses a hanging basin or a half pedestal basin, under the feet Convenient for wheelchair access, height 800mm. Equipped with safety anti-collision armrests, toilet anti-collision armrests are 700mm above the ground, and the spacing width is 700-800mm, urinal anti-collision armrests are 1180mm above the ground, and basin anti-collision armrests are 850mm above the ground.

Barrier-free armrest seat is a tool for assisting movement, which is more common on the market now. Barrier-free handrails are sometimes called safety grab bars. In the past, they appeared more often in public places. Its function is to help the elderly in their actions. Until now, this tool is often seen not only in public areas, but also at the entrance of a community or in the corridor. Now in many families, this tool is also installed in the bathroom for the safety of the elderly. So what are the requirements when designing anti-collision handrails? Let's take a look with the editor below.

Anti-collision performance: All anti-collision panel materials need to be tested according to ASTM-F476-76 (the test weight is 99.2 pounds). After the test, the surface material must not be broken or changed. The contractor must attach the test report for inspection before construction .

Panel material: extruded panel made of high-density lead-free polyvinyl chloride (LEAD-FREE PVC) polymer.

Abrasion resistance: The anti-collision panel material needs to be tested according to ASTM D4060, and it should not exceed 0.25g after the test.

Flame resistance: The anti-collision panel must pass the CNS 6485 flame resistance test and can be naturally extinguished within 5 seconds after the fire source is removed. The contractor must submit a test report for inspection before construction.

Stain resistance: The anti-collision panel material needs to pass the test according to the ASTM D1308 standard. The common weak acid or weak alkali pollution can be wiped clean with water.