How to install anti-collision handrails to be stronger

Everyone must have a certain understanding of the role of the anti-collision armrest, that is, it is convenient for people to play a supporting role when they are weak or inconvenient, but if the user's strength is large, and the anti-collision armrest is not firmly installed, it is very easy Falling off and causing injury to the user is more than worth the loss. So how to install the anti-collision handrail to make it stronger?

1. When installing the anti-collision handrail, ensure that the distance between the outer edge of the handrail elbow and the door sleeve line is kept at 20-30 mm.

2. When installing the anti-collision handrail, it is necessary to reasonably control the distance between the fixed points of the support between the two anti-collision handrails according to the length of the installation wall to ensure that it can be used safely.

3. When installing, pay attention to ensure that the height of the center point of the anti-collision handrail from the ground is consistent, and the surface of the handrail must be consistent. Generally, the height of the anti-collision handrail is required to be 900 mm.

4. When tightening the anti-collision handrail bolts, be careful not to use too much force to avoid damaging the wall or destroying the beauty of the anti-collision handrail.

In short, in order to make the installed anti-collision handrail stronger, the elbow and the panel of the anti-collision handrail should be installed firmly without loosening, and the anti-collision handrail should be formed in a straight line with no difference in height and height.

YUYAO BEILV SANITARY WARE CO., LTD is located in the town of water heating Equipment of China——Yuyao, Ningbo, a historical cultural city of Zhejiang, closed to Hangzhou Port and Ningbo Port, with superior geographical location and beautiful environment.

Our company is a combination of industry and trade, specializing in high-end bathroom accessories, such as ADA stainless steel grab bar, shower curtain rods, copper mesh baskets, towel racks, shower curtains, hoses, etc, exported to the United States, Canada, Europe, Germany, Italy, Spain, Japan, etc.

Our factory integrates production and manufacturing with a stamping workshop, a hardware workshop, a die-casting workshop, a polishing workshop, an assembly workshop, etc. Our equipment is ahead of our peers, with strong cost and quality control, factory direct sales, and high quality and favorable price. Our factory has our own laboratory and advanced testing equipment in the industry, including spectrum analyzer XRF, universal tensile tester, salt spray tester, D65 light source box, etc., which can stand the test of quality from customers.