Install anti-collision handrails to make it stronger

The places where elderly people fall are usually in bathrooms, toilets and bedrooms. Therefore, anti-collision handrails are generally installed in the places where the elderly live to prevent the elderly from falling. The anti-collision handrails installed on these occasions usually have to ensure that the elderly What are the thoughtful setting principles for body balance and ease of walking?

1. Continuous setting of anti-collision handrails

In the place where the anti-collision armrest is interrupted, the elderly need to adjust their body posture when walking and cause the phenomenon of falling. Therefore, in order to ensure that the elderly can walk safely for a long time, it is necessary to carry out uninterrupted continuous settings.

2. The anti-collision armrest setting for both left and right

Every elderly person’s physical condition and hand habits are different, and some like to use their hands to assist in walking. Therefore, the editor of Mingjian Nursing recommends that you install anti-collision handrails on both sides of the road to meet the needs of the elderly. Different usage requirements.

The function of the anti-collision handrail must be understood by everyone, that is, it is convenient for people to play a supporting role when the body is weak or inconvenient, but if the user's strength is large, and the anti-collision handrail is not securely installed, it is easy If it falls off and causes the user to be injured, the gain is not worth the loss. So how to install the anti-collision handrail to make it stronger?

1. When installing the anti-collision handrail, ensure that the distance between the outer edge of the handrail elbow and the door cover line is kept at 20-30 mm.

2. When installing the anti-collision handrails, the distance between the fixed points of the two anti-collision handrails should be reasonably controlled according to the length of the installation wall to ensure its safe use.

3. When installing, pay attention to ensure that the height of the anti-collision handrail center point is consistent with the ground, and the surface of the handrail should also be flat. Generally, the height of the anti-collision handrail is 900 mm.

4. When tightening the anti-collision handrail bolts, be careful not to use excessive force to avoid damaging the wall or destroying the beauty of the anti-collision handrail.

In short, in order to make the installed anti-collision handrails stronger, during installation, the elbow of the anti-collision handrail and the panel should be installed firmly without looseness, and the height of the anti-collision handrail should be formed into a straight line without any drop.