Installation method of bathroom safety bar

The elderly take a bath in the bathroom because the ground is slippery and prone to fall and cause accidental injury. In addition, the high temperature and low air pressure in the bathroom will induce the onset of heart and brain diseases in the elderly, dizziness, palpitation and other symptoms, which increase the possibility of falling. What is the installation method of bathroom safety handrails?

For elderly residents, the home is one of their main places of activity, and it is also a place with a high incidence of accidents such as falls. In order to minimize the occurrence of falls and injuries of the elderly, many families have installed safety handrails in the bathroom. There are many advantages of using safety handrails for the elderly. Now I will introduce the installation method of safety handrails in the bathroom.

The tools to be prepared for installing the safety handrail are: safety handrail accessories, including aluminum alloy, hard PVC cover, bumper strip, elbow, bracket, expansion bolt, elbow fixing screw. The necessary tools for installing the handrail: aluminum alloy cutting machine, impact drill (with M12 drill bit), hand drill (with M6 drill bit), sander, No. 10 and No. 14 socket wrenches, utility knife, tape measure, scissors, pencils, markers Pen, hammer, etc.

The installation steps are as follows:

1. Measure and mark important positions; according to the height requirements of the safety handrail, measure the distance between the bottom and the top of the wall, and mark the position of the bolt and the bolt on the wall.

2. Mounting brackets and screws;

3. Install the handrail;

4. Test whether the handrail installation is firm;

5. Clean and tidy up.

The bathroom safety bar are used by the elderly or the infirm. The most important thing is safety. The handrails should be installed firmly, should be able to bear the weight of the body, and the shape of the handrails should be easy to grasp. So be careful during installation.