With the improvement of the quality of life, people's demand for bathroom decoration is also increasing, so the shower room quietly penetrates into every family. It not only keeps the outside of the bathroom dry, but also provides people with a comfortable bathing space. But how to install? Let's take a look at the installation method of the shower room!
shower room
1. How to install the shower room-the fixing method of the frame
The first step in the installation of the shower room is to locate and drill holes, and then fix the frame. Many tools are required for positioning and drilling, and the operation is complicated. Let us see how the installer performs this step.
1. Determine the drilling position: use tape measure + pen
The shower room must be fixed. The fixing method is generally to use screws. There will be holes on the wall of the aluminum alloy frame. All that is to be done is to mark the corresponding position of the wall. The method is to stick the frame to the wall, make sure the tape is in the correct position, and then mark the wall with a pencil.
2. Drilling: use percussion drill
Step 1: After setting the position, the next step is drilling. Drilling is also divided into two steps. First, use a circular impact drill to make a shallow hole at the marked location on the wall.
Construction tips: Because the walls of the bathroom are paved with bricks, they are relatively hard. To make drilling easier, the drill bit can be wetted. In addition, when drilling, water splashes when drilling.
Step 2: After making the prototype marking holes, the next step is to use a spiral drill with greater impact. Based on the shallow holes that have been drilled, deeper holes should be drilled.
3. Install rubber particles: use a hammer
Before screwing into the wall, expanded rubber particles must be installed in the holes, so that the screws can be better fixed. Use a hammer to drive the particles into the hole.
4. Fixing frame: use electric screwdriver
After completing the above steps, you can install the shower room frame. Place the bottom frame on the water retaining bar, and then fix the frame. The method is to use an electric screwdriver to screw the screws into the wall to fix the frame.
How to install the shower room
Second, how to install the shower room-shower room glass installation
After fixing the frame, the next step is to install the glass in the shower room. If installed improperly, problems such as inability to join seams are likely to occur. If the shower room consists of two tempered glass and two sliding doors, after installing the bottom frame and wall frame, the next step is to install two tempered glass. First, you need to install the tempered glass in a suitable position, and then fix the bottom. The two tempered glasses do not need to be moved, so they need to be fixed with accessories. First, use U-shaped fittings to clamp the main body, and then use pliers and a screwdriver to fix the nuts and screws on the connecting part connected to the bottom frame.
Call us now
Inquiry us now
