Sanitary ware classification and installation knowledge

Sanitary Ware Classification 1. Bathtub The bathtub material can be divided into: cast iron bathtub, steel plate bathtub, wooden bathtub. Cast iron bathtubs are casted using cast iron as raw materials; steel bathtubs are processed using steel plates as raw materials; wooden bathtubs are made of cedar coated with copper oil. 2. Shower room The shower room is made of tempered glass as a bath room partition bath screen. The main material of the frame is made of aluminum alloy, and the shower room can be roughly divided into curved, diamond, arc and other shapes according to the shape. 3. Bathroom cabinet The bathroom cabinet is used to store toiletries, while the top cabinet is made of composite veneer sheet. 4. Toilet Toilets are divided according to structure: rear sewage toilets and lower sewage toilets. The sewage outlet of the rear sewage toilet is connected to the toilet on the reserved sewage outlet of the wall behind the toilet body. The sewage outlet of the lower sewage toilet is below the toilet body, and the toilet is connected to the reserved sewage outlet on the ground. 5. Basin Wash basins are divided into three types: above counter basins, under counter basins and column basins. The above counter basin is installed on the countertop, and the basin is along the basin above the countertop; while the under counter basin is installed on the countertop, the entire basin is below the countertop; Wash basin. How to install and accept sanitary ware 1. Bathtub After filling the bathtub with water, check for leaks. 2. Floor drain Splash water on the ground to see if the water flows to the floor drain and there is no residue. 3. Shower room The appearance of the shower room should be neat and bright. The blocking door and the sliding door are parallel and perpendicular to each other, and they are symmetrical. The two mobile doors are easy to open and close, and they can be closed without gaps and without water leakage. 4. Toilet Check if the pit distance of the toilet is reasonable. If the pit distance is too small, the water tank will enter the wall, and the use and appearance will be affected; and if the pit distance is too large, the toilet and the wall will have a large space. There are many brands in the big market, and it is not easy to stand out. There are even many unknown brands that have come to the forefront. How to keep the brand in the minds of consumers has become a problem that companies need to consider. The first is to carry out market innovation and dig deeper into the company's own core products, the purpose is to continuously expand its advantages. Use the power of the media to shape the corporate image, and don't let the company disappear in people's eyes. The so-called surprisingly successful marketing planning program needs to be built on the actual business situation before it can have a chance to form a breakthrough. The second is brand innovation. You should look for freshness on the basis of familiarity. Never use marketing methods that you are not familiar with to innovate at will. This is a disadvantage. Learn to pinpoint consumer groups, focus on the brand's core positioning, and finally decide which communication method to use. The last thing is to understand channel innovation. To promote the progress of dealers, at the same time, we must adjust channel marketing, use innovative elements to formulate relative marketing strategies, such as keeping pace with the times, adapting to local conditions, increasing and decreasing, etc. For channel innovation, it is necessary to increase channels to decompose products and functions in multiple directions, and to effectively carry out product innovation through channels.