What you need to pay attention to when installing the shower curtain rod

Shower curtain rods are often used in our daily lives. We all know that a good shower curtain rod is necessary in the bathroom. A good bathing environment is what everyone wants. Only a lot of hardware conditions are necessary. Only when it is reached. The following editors will tell you what you need to pay attention to when installing the shower curtain rod! First install the shower curtain rod and shower curtain, and then determine the position of the water strip according to the installation height of the shower curtain rod and the position of the shower curtain hem, because the water strip must be installed outside the shower curtain hem, otherwise the water on the shower curtain will crack All ticked outside. In the past, the water strip was installed at the same time as the floor tile was installed. In fact, it is not necessary to do so. However, the result is that the water strip is embedded in the floor tile. If the water strip breaks in the future, it may be troublesome to replace it. . 1. The shower area is better to have walls on three sides, and more importantly: the shower curtain rods are topped with an "expansion rod" on the walls at both ends. What is an expansion rod? An "expansion rod" is an expandable iron pipe. After the two sides of the head are fixed, they are fixed as soon as they are twisted. Xiaobian described it very broadly. If you plan to use a shower curtain, it is better to go to the building materials market in advance. The larger bearing capacity of the "Expanded Rod" is generally 20 kg, which can be used for bath towels, and the "Expanded Rod" can be moved and replaced anytime and anywhere, which is very convenient; 2. If only two sides of the shower area have a wall, the shower curtain rod can only be fixed on the wall with a kind of arc steel pipe. One disadvantage of this fixed arc steel pipe is that due to uneven force, it is easy for a long time. Looseness has occurred. The width of the natural stone water retaining strip is generally three sizes: 3 cm, 5 cm, and 6 cm, 5 cm for small households; generally there are two sizes, 1 cm and 1.8 cm, and 1.8 cm for small households; Some people like to install the water barrier upright. Actually, it is not necessary. The height of 1.8 cm is enough. If the water surface reaches 1.8 cm and the floor drain has not discharged, it is not the problem of the water barrier, but the problem of the floor drain; 3. If the floor tile is installed first and then the water retaining strip is installed, it takes 24 hours for the glass glue to fix the water retaining strip to be siliconized. Responsible workers will recommend that you do not let the glass glue attract water within 48 hours. Psychological preparation for not being able to take a bath for two days.